Table of Contents
Advertisement
Sensor Programming – Automatically Generate Sensor ID (1-5)
1. After Vehicle selection,
select Sensor
Programming then
Automatically Create
ID (1-5).
3. When the TruSensors are
detected select Continue to
begin programming.
TS-58R TPMS Diagnostic Tool
2. Place all the new TruSensors
to be programmed within 4 in.
(10 cm) of the TS58R. Any quantity
from1 to a maximum of 5 sensors
may be programmed.
4. If the Sensors are programmed
successfully, the sensor ID and
Serial Numbers will be displayed on
the TS58R screen.
21
5900313 - Rev. A - March 2023
Advertisement
Table of Contents
