Ranger TruSensor TS58R User Manual page 2

Manual. TS58R TruSensor Tire Pressure Monitoring System Diagnostic & Service Tool, User
Guide, P/N 5900313, Manual Revision A, March 2023.
Copyright. Copyright © 2023 by BendPak Inc. All rights reserved. You may make copies
of this document if you agree that: you will give full attribution to BendPak Inc., you will not
make changes to the content, you do not gain any rights to this content, and you will not use
the copies for commercial purposes.
Trademarks. BendPak, the BendPak logo, Ranger, and the Ranger logo are registered
trademarks of BendPak Inc. All other company, product, and service names are used for
identification only. All trademarks and registered trademarks mentioned in this manual are the
property of their respective owners.
Limitations. Every effort has been made to use complete and accurate instructions in this
manual. However, product updates, revisions, and/or changes may have occurred since
this manual was published. BendPak Ranger reserves the right to change any information in
this manual without incurring any obligation for equipment previously or subsequently sold.
BendPak Ranger is not responsible for typographical errors in this manual. You can always
find the latest version of the manual for your product at the BendPak website.
Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a
commitment to the value of your new product. For full warranty details, contact your nearest
BendPak Ranger dealer or visit bendpak.com/support/warranty. Go to
bendpak.com/support/register-your-product/ and fill out the online form to register your
product (be sure to click Submit).
Safety. Your new product was designed and manufactured with safety in mind. Your safety
also depends on proper training and thoughtful operation. Do not set up, operate, maintain,
or repair the unit without reading and understanding this manual and the labels on it; do not
use this product unless you can do so safely! pnematic
Owner Responsibility. In order to maintain your product properly and to ensure operator
safety, it is the responsibility of the product owner to read and follow these instructions:
• Follow all setup, operation, and maintenance instructions.
• Make sure product setup conforms to all applicable local, state, and federal codes, rules,
and regulations, such as state and federal OSHA regulations.
• Read and follow all safety instructions. Keep them readily available for operators.
• Make sure all operators are properly trained, know how to safely operate the unit, and are
properly supervised.
• Do not operate the product until you are certain that all parts are in place and operating
correctly.
• Carefully inspect the product on a regular basis and perform all maintenance as required.
• Service and maintain the unit only with approved replacement parts.
• Keep the manual with the product and make sure all labels are clean and visible.
• Only use this product if it can be used safely!
Unit Information. Enter the Model Number, Serial Number, and the Date of Manufacture from the label
on your unit. This information is required for part or warranty issues.
Model:______________________________ Serial No:___________________________
Date of Manufacture:
_________________________
TS-58R TPMS Diagnostic Tool 2
5900313 - Rev. A - March 2023