Faro ZEB Revo RT Getting Started

Table of Contents

Download this manual

Getting Started with ZEB Revo RT

Overview

We want to get you set up as quickly as possible. Here you'll find resources to get the best from your ZEB Revo RT.

This system has live feedback on data capture allowing users to visualize their point clouds as they are captured. Follow

the steps on this page and you'll be doing your first scan in minutes.

The ZEB Revo RT has had two versions of dataloggers, please refer to section that matches your datalogger. Not sure

which version datalogger you have,

Unbox and Assemble

Click here

to download this video.

Media, iframe, embed and object tags are not

supported inside of a PDF.

click here to

check.

https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Revo_and_Revo_RT/Getting_Started_with_ZEB_Revo_RT

Standard Operation

Click here

to download this video.

Media, iframe, embed and object tags are not

supported inside of a PDF.

Updated: Wed, 11 Oct 2023 12:20:03 GMT

Table of Contents

Do you have a question about the ZEB Revo RT and is the answer not in the manual?

Page 1 Overview We want to get you set up as quickly as possible. Here you’ll find resources to get the best from your ZEB Revo RT. This system has live feedback on data capture allowing users to visualize their point clouds as they are captured. Follow the steps on this page and you’ll be doing your first scan in minutes.
Page 2 Password: zebedee12 • Battery charger and power supply unit • Display Use a web browser and navigate to IP: 192.168.102.2 Once connected, an interface to the ZEB Revo RT • Main cable processing unit will appear. • GeoSLAM USB stick (includes •...
Page 3 Under these circumstances we recommend using the Ethernet cable provided for the duration of the scan. • You can connect to the ZEB Revo RT with multiple devices using the IP address, although this will slow down the viewer if there are several devices connected.