Advertisement
The SECRET
function allows you to protect confidential data with a
password so that no unauthorized person can access it. You may mark
certain entries as private; displaying or modifying such data requires the
password.
Any entry from the SCHEDULE, TEL, MEMO, TO DO, AN-
NIVERSARY and EXPENSE modes can be classified.
Registering a password
Press
and the password entry prompt will appear.
Enter your password and then press
. The SECRET function
is now set to operate and "
" will appear.
The password can contain
up to seven letters, numbers, spaces, or symbols (except
). To turn
the SECRET function off, you must enter the password exactly as you
registered it, without, for example, changing capital letters to small or vice
versa.
Important:
If you ever forget the password, you will have to erase all
your secret data. Make sure the password is one you will
never forget.
To register "1234" as the password, for example:
1. Recall the password entry prompt.
SET
PASSWORD
be
]
Note:
If the password has already been registered, "ALLOW AC-
CESS TO SECRET DATA'
will be displayed.
If this occurs,
refer to "What to do if you forget the password" on page 89
and delete the previous password and secret data.
2. Enter "1234" as the password.
1234
83
Advertisement
