Advertisement
1. Select the data transfer function on the receiver and set it in the receive
mode for backup data transfer.
[2nd] 2
( UNIT
TO UNIT
)
BACKUP
RECEIVING
MODE
2. Select the data transfer function on the transmitter and perform backup
data transfer.
[2nd ] [OPTION] [2nd] 1
Verifying data
It is possible to verify data by mode or by entry. If any discrepancies are
found, the message "VERIFY ERROR' is displayed.
Verify data in the SCHEDULE mode.
1. Select the mode on the transmitter and the receiver.
SCHEDULE
(Transmitter)
SCHEDULE | (Receiver)
2. Set the receiver in the verify mode.
OPTION]
3
( UNIT
TO UNIT
)
-VERIFYING-
3. Select the data transfer function on the transmitter.
Note:
To verify an entry, display the entry to be verified and press
[2nd
] [OPTION] .
4. Perform verification.
1
98
Advertisement
