Advertisement
e
Letters (A-Z), numbers (0-9), a space and a hyphen can be entered to
search listings. Capital and small letters are not distinguished. Accented
characters such as "U" and "é" are ignored.
and
let you step up and down a page at a time.
To see the whole listing, move the pointer using [a | and Lv | to indicate
the listing you want, and press
[ENTER].
Editing listings
To edit a listing, recall it, and then press [ 2nd |
[2nd | [EDIT] to enter the edit
mode.
Use [ DEL | or [BS] to delete characters. With the cursor " "you may
type over the data.
Or, press [INS | to change the cursor 6 " a" and
you may insert new data. After the correction, press
to store
the new listing. If
ENTER]
is pressed instead of [ENTER], the
revised listing will be stored without erasing the original one.
(Refer to
"Copying scheduled data", page 38.)
Deleting listings
Either single listings or an entire directory (TEL 1, TEL 2, or TEL 3) can
be deleted, as required.
Deleting single listings
1. Select the directory containing the listing to be deleted (TEL 1,- TEL 2,
or TEL 3).
2. Recall the listing to be deleted.
3. Press
.
The delete prompt "DELETE ? Y/N" appears.
4. Press [Y ]. (To retain the data, press [.N ].)
e
You can also delete individual entries using the index display. Display
the index of the desired directory with
INDEX], select the .
listing you want to delete with the pointer and press
Deleting entire directories (TEL 1, TEL 2, or TEL 3)
Any one of these directories can be deleted separately by using DATA
DELETION in the Function menu.
55
Advertisement
