Advertisement
Transferring data with another ZQ series
or IQ series Organizer
% Prior to transferring data, make sure the secret mode is off — In other
words, there should be no
symbol on the display.
Data transfer restrictions
There are some restrictions when transferring data with any ZQ series
Organizer (other than the ZQ-4300) or the IQ series Organizers (chart
shown previously). These restrictions result from differences in functions
and the maximum allowable size of an entry between the Organizers.
When transferring SCHEDULE data from ZQ-6000, !Q-8000, IQ-7000
series or ZQ-5000/ZQ-5200 Organizers
e
Any alarms set on SCHEDULE
data transferred from the ZQ-6000,
1Q-8000, IQ-7000 series or ZQ-5000/ZQ-5200 Organizers, regardless
of their precise setting time for specific event, will be set to the event's
starting time on the ZQ-4300.
When transferring data from ZQ-6000 or IQ-8000 series Organizers
e
When transferring an entry from the ZQ-6000 or IQ-8000 series to the
ZQ-4300, the maximum allowable size of the transferred entry is as
follows:
TEL mode:
537 characters
SCHEDULE
mode:
523 characters
MEMO mode:
544 characters
TO DO mode:
530 characters
If an entry exceeding these limits is sent to the ZQ-4300, "I/O DEVICE
ERROR?" appears and the transfer will not be successful.
The maximum number of characters that can be edited after an entry
is transferred to the ZQ-4300 is 514 in the TEL mode and 512 in the
SCHEDULE, MEMO and TO DO modes. Entries exceeding these limits
can be displayed but cannot be edited. Those exceeding 515 characters
can neither be displayed nor edited.
e
Mode transfers from the ZQ-6000 series and IQ-8000 series can be
performed even when the maximum length of an entry exceeds the
character limits specified above. However, to display and edit data, the
number of characters must be within these limits.
99
Advertisement
