Advertisement
4.
Use the [+] and [-] buttons to select the number of the data you want to save.
5.
Press the [ENTER] button to display the File Name edit screen. The cursor will appear
at the left end of the file name.
6.
Edit the name of the file to be saved.
Use the [<] and [>] buttons to move the cursor and then use the [+] and [-] buttons to
select a character at the cursor position. Repeat these steps to finish the file name.
See
this page
for details.
7.
Press the [ENTER] button. A confirmation message is displayed.
8.
Press the [ENTER] button again to save the file.
If there is a file with the same name in the root directory of the USB flash drive, the
confirmation message "Overwrite?" is displayed. To overwrite the existing file, press
the [ENTER] button again.
FGDP-50 User Guide
90
Advertisement
