Advertisement
While the Ending section is playing, you can switch to another section by hitting the
Pad for that section.
Section selection state
Stopped
• Starting playback with the Intro section and then switching to the Main section (Main A
in the figure below)
The [2 INTRO/ENDING] RGB Square Pad is on and the Main RGB Square Pad is
blinking in standby.
• Starting playback with the Main section (Main A in the figure below)
Only the RGB Square Pad for the corresponding section is on.
• Starting playback with the Ending section (Other sections can be specified after
playback starts.)
If only the [2 INTRO/ENDING] RGB Square Pad is lit, playback will start from the Intro
section and then switch to the Main section (the first state for "Stopped"). This state is
achieved by hitting the [2 INTRO/ENDING] RGB Square Pad.
Playing back
• Switching to the Main section while the Intro section is playing (Main A in the figure
below)
The [2 INTRO/ENDING] RGB Square Pad is on and the Main RGB Square Pad to be
switched to is blinking.
FGDP-50 User Guide
65
Advertisement
