Advertisement
Problem
Hitting a Pad causes a
session to start
playing.
Hitting the [7
START/STOP] RGB
Square Pad does not
stop the session that
is playing.
Hitting the [2
INTRO/ENDING]–[6
MAIN D] RGB Square
Pads does not switch
between the sections
of the session that is
playing.
The Sequencer's 16th
notes are not equally
spaced.
@
Operations
Problem
The buttons do not
work.
The Velocity of Note
On does not increase
(decrease) even if
the Pad is hit
strongly (softly).
@
Other
Problem
Cause
[SESS]→SynchroStart
set to "On."
The product is in a mode
other than Session Creator
Mode.
The product is in a mode
other than Session Creator
Mode.
[MENU]→Utility→Swing
set to a value other than
"0."
Cause
The Panel Lock function is
enabled.
The setting for the current
Trigger does not match the
strength with which you hit
the Pad.
Cause
Solution
is
Set
[SESS]→SynchroStart
Press the [SESS] button to enter Session
Creator Mode, and then hit the [7
START/STOP] RGB Square Pad.
Press the [SESS] button to enter Session
Creator Mode, and then hit the [2
INTRO/ENDING]–[6 MAIN D] RGB Square
Pads.
is
Set
[MENU]→Utility→Swing
Solution
Follow the instructions on
disable the Panel Lock function.
Follow the instructions on
select a different Trigger, or change
one of the following items.
•
"Velocity Fixed
Curve" for each Pad
•
"Velocity
Minimum" and
Maximim" for each Pad
• "ADGain" for each Pad
Solution
FGDP-50 User Guide
to "Off."
to "0."
this page
to
this page
to
Value" and
"Velocity
"Velocity
121
Advertisement
