Advertisement
Pan*
Tuning*
Decay*
Cutoff*
Resonance*
Filter*
ReverbSend*
ChorusSend*
VarSend*
Tempo*
SessRetrigger
ControlChange*
* This setting must be configured on the "Setting" screen.
Changes the pan (stereo image) of all parts of the
sound output from the product.
Changes the pitch of all parts of the sound output
from the product.
Changes the decay (the time from when a sound is
generated to when it fades out) for all parts of the
sound output from the product.
Changes the cutoff frequency of the filter for all
parts of the sound output from the product.
Changes the Q of the filter for all parts of the sound
output from the product.
Changes the filter for all parts of the sound output
from the product. When this item is adjusted, the
values for "Cutoff" and "Resonance" are linked to
achieve the best musical sound.
Changes the mix for the Reverb (Send) for all parts
of the sound output from this product.
Changes the mix for the Chorus (Send) for all parts
of the sound output from this product.
Changes the mix for the Variation (Send) for all parts
of the sound output from this product.
Changes the tempo of the Sequencer, such as for
Click and Session Creator.
The currently playing session is reset and played
again from the first measure. The harder the
designated Pad is pressed further, the faster the
timing of the reset (1/1, 1/2, 1/4, 1/8, 1/16, 1/32 of a
measure).
MIDI Control Change messages are output instead
of Aftertouch messages. The Control Change
number is set in "Setting," and the Aftertouch value is
applied. The MIDI channel is set in [MENU]→Trigger.
FGDP-50 User Guide
114
Advertisement
