Advertisement
This product is not
recognized by a
smart device, even
though they are
connected via USB.
Sometimes the
lighting pattern of
the LEDs on the
RGB Square Pads
changes when a
Pad is hit.
@
Some smart devices might
misidentify themselves as the
host (discharge side) and
automatically disconnect.
[MENU]→Utility→
LEDPatAutoBar
is set to a
value other than "Off," and
[KIT]→PadEdit→NoteRepRat
for the Pad that is hit is set to
a value other than "Off."
Disconnect the USB cable, and then
connect it again. See
about the USB connection between this
product and a smart device.
Set
[MENU]→Utility→LEDPatAutoBar
"Off," or the
[KIT]→PadEdit→NoteRepRat
to "Off."
FGDP-50 User Guide
this page
for details
to
122
Advertisement
