Advertisement
T (Triplet), the Voice will repeat on triplets of each of these
settings.
NOTE
To add swing to Note Repeat, configure the
[MENU]→Utility→Swing.
NoteRepTyp
Abbreviation for Note Repeat Type.
This sets whether a Pad Voice is repeated on the down beat or
the up beat when using Note Repeat Rate.
@
Note On/Off when operating Pads (Hold Mode)
Item
Description
(Display)
HoldMode
This switches the behavior of the Note On/Off output when the
designated Pad is hit. When set to Off, Note On is output
when the Pad is hit, and Note Off is output if Aftertouch is not
used. When set to On, Note On and Note Off are output
alternately each time the Pad is hit.
If Note Repeat Rate for the designated Pad is set to anything
other than Off, setting this item to On will toggle start/stop
for Note Repeat each time the Pad is hit.
If a User Sample is assigned to a Voice on the designated Pad,
setting this item to On will toggle start/stop for repeat of
the User Sample each time the Pad is hit.
@
Mute when operating Pads
Item
Description
(Display)
NoteOnMut
Abbreviation for Note On Mute.
This is used to mute (On) or not mute (Off) the Voice when a Pad
that is being played back is sending Note On. (If HoldMode=Off,
hit the Pad one more time. If HoldMode=On, hit the Pad two more
times.)
NoteOffMut
Abbreviation for Note Off Mute.
This is used to mute (On) or not mute (Off) the Voice when a Pad
that is being played back is sending Note Off. (If HoldMode=Off,
do not press the Pad further. If HoldMode=On, hit the Pad one
more time.)
@
Down, Up
Setting Range
Off, On
Setting
Range
Off, On
Off, On
FGDP-50 User Guide
45
Advertisement
