Connecting The Power - Uniden LRD6199SWS Operating Manual

Connecting the Power

The LRD6199SWS is designed to operate on most 12 VDC negative
ground vehicle electrical systems. The power cord provided with the unit
has a cigarette lighter socket plug at one end and a small connector at the
other.
1. Insert the small connector into the jack on the side of the unit.
2. Insert the other end into the cigarette lighter socket of your
vehicle.
When installing the power cord, make sure that:
The socket is clean to allow proper contact.
The power cord does not block the antenna area on the back of the
unit.
Your unit also comes with ten power cord mounting clips. You can use
these clips to attach the power cord to the window frame or other parts of
the vehicle, keeping it neat and out of the way. Use the double-sided
foam tape squares to attach each clip. Slip the power cord into the clip to
hold it securely in place.
10