Table of Contents
Advertisement
Use only a Uniden
supplied power cord
or its replacement.
CONNECTING THE POWER
The LRD 747/LRD 757 is designed to operate on most 12 VDC
negative ground vehicle electrical systems. The power cord
provided with the unit has a cigarette lighter socket plug at one
end and a small connector at the other.
1)
Insert the small connector into the jack on the side of
the unit.
2)
Insert the other end into the cigarette lighter socket of
your vehicle.
When installing the power cord, make sure that:
The socket is clean to allow proper contact.
The power cord does not block the antenna area on the back
.
of the unit
Your unit also comes with ten power cord mounting clips. You
can use these clips to attach the power cord to the window frame
or other parts of the vehicle, keeping it neat and out of the way.
Use the double-sided foam tape squares to attach each clip. Slip
the power cord into the clip to hold it securely in place.
11
Advertisement
Table of Contents
