Monitoring & Settings - Victron energy BlueSolar PWM 12V/24V 30A Manual

4. LCD DISPLAY and SETTINGS
MENU：switch between different display, or to enter/exit setting by long press.
UP：press to change the settings when in setting mode.
DOWN: press to change the settings when in setting mode.
Load on/off button when in H mode.
4.1 Monitoring & Settings
Values between [ ] are for 24V battery settings. Bolt are the 48V settings.
www.butlertechnik.com
Boot Display. After connecting the batteries, you see the type
of charger and the measured battery voltage.
1230= BlueSolar Charge Controller – LCD – USB 12V|30A
2430= BlueSolar Charge Controller – LCD – USB 24V|30A
4810= BlueSolar Charge Controller – LCD – USB 48V|10A
4820= BlueSolar Charge Controller – LCD – USB 48V|20A
4830= BlueSolar Charge Controller – LCD – USB 48V|30A
Press MENU
3
www.butlertechnik.com
to enter next display.