Table of Contents
Advertisement
Press
or
multiple
skip
repeat
times to scroll through
numbers on the display.
SELECTING THE MESSAGE RECORD TIME
You can set your answering system to record messages up to one or four minutes
long. There are two separate REC TIME switches on the side of the base unit, one for
each line.
One minute option: move the
switch to 1.
Four minutes option: move the
switch to 4.
Announce only feature:
The announce only feature plays an outgoing message, but it will not allow the caller
to leave a message. Move the
counter LED displays " " when system is on standby. If you have selected the
prerecorded greeting, the answering system announces:
"Hello, no one is available to take your call." twice.
If you have selected the user greeting, the answering system announces your personal
message twice.
SELECTING A PIN CODE
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps.
1. On the base, press and hold
seconds, you will hear the beep and the
LED displays
.
2. To set the first digit, press
number appears in the display, press
3. To set the second digit, press
desired number appears in the display, press
the entered PIN is announced.
and
line 1
REC TIME
REC TIME
switch to the
REC TIME
for 2
pin
or
to scroll from 0 to 9. When the desired
skip
repeat
. This selects the first digit.
pin
or
to scroll from 0 to 9. When the
skip
repeat
pin
must use the same PIN code.
line 2
position. The message
ANN
. This selects the second digit and
45
Advertisement
Table of Contents
