Selecting The Message Record Time; Selecting A Pin Code - Uniden EXLA8950 Owner's Manual

Press or
multiple times to scroll
through numbers on the
display.

Selecting the message record time

You can set your answering system to record messages up to one
or four minutes long.
One minute option:
move the REC TIME
switch to 1 .
Four minutes option:
move the REC TIME
switch to 4 .
Announce only feature:
ª
The announce only feature plays an outgoing message, but it will
not allow the caller to leave a message. Move the REC TIME
switch to the ANN position.
The message counter LED displays "
standby.
Prerecorded outgoing message for Announce only feature is:
"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to
enter a two-digit Personal Identification Number (PIN) code
(00-99). To select a PIN, perform the following steps.
" when system is on
1
On the base, press and hold
button until a beep sounds, and the
LED displays 00.
2
To set the first number, press
or to scroll from 00 to 90.
When the desired number appears in
the display, press
the first number.
3
To set the second number, press
or to scroll from 0 to 9.
When the desired number appears in
the display, press
the second number and then the
entered number is announced.
REC TIME
ANN/4/1
pin
pin . This selects
pin . This selects
28