Selecting The Message Record Time; Selecting A Pin Code - Uniden EXS 9950 Owner's Manual

Press or
skip
repeat multiple
times to scroll through
numbers on the display.
25

Selecting the message record time

You can set your answering system to record messages up to one
or four minutes long.
One minute option:
move the REC TIME
switch to 1 .
Four minutes option:
move the REC TIME
switch to 4 .
Announce only feature:
ª
The announce only feature plays an outgoing message, but it will
not allow the caller to leave a message. Move the REC TIME
switch to the ANN position.
The message counter LED displays "
standby.
Prerecorded outgoing message for Announce only feature is:
"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to
enter a two-digit Personal Identification Number (PIN) code
(00-99). To select a PIN, perform the following steps.
skip/
" when system is on
1
On the base, press and hold
button until a tone sounds and the
LED displays
2
To set the first number, press
skip or
from 0 to 9. When the desired
number appears in the display, press
pin
. This selects the first number.
3
To set the second number, press
repeat
skip or
from 0 to 9. When the desired
number appears in the display, press
. This selects the second
pin
number and then the entered
number is announced.
REC TIME
ANN/4/1
pin
.
repeat to scroll
to scroll