Table of Contents
Advertisement
34
USING CALLER ID
You must subscribe to Caller ID from your phone company to use
this feature.
Setting up Caller ID options
There are three Caller ID options available; they are AutoTalk, CIDCW, and Area Code.
AutoTalk allows you to answer the phone without pressing
phone rings when AutoTalk is on, simply remove the handset from the base. If the
handset is off the base, press any key. The phone automatically answers the call. If
the phone rings when AutoTalk is off, you must press
call. This option is useful for screening calls.
CIDCW (Caller ID with Call Waiting) performs the same as regular Caller ID on a
call waiting number. You must subscribe to CIDCW from your phone
company to use this feature.
Area Code allows you to program your 3-digit area code number.
When reviewing Caller ID messages, you will see only a seven digit number for calls
received from inside your area code. For calls from outside your area code, you will
see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program
this option.
To change your Caller ID options:
Turning AutoTalk and Caller ID/Call Waiting On or Off
1. Press and hold
call id/hold
seconds. The following screen appears.
2. Use the
and
keys to select
or
or also you can press 1 or 2.
3. Press
select
line 1
for two
or
. If the
line 1
line 2
or
to answer the
line 2
Advertisement
Table of Contents
