Table of Contents
Advertisement
Press and hold
or
multiple times to
scroll through numbers
on the display.
Selecting the message record time
You can set your answering system to record messages up to one
or four minutes long.
One minute option:
move the REC TIME
switch to 1.
Four minute option:
move the REC TIME
switch to 4.
Announce only feature:
ª
The announce only feature plays an outgoing message, but it will
not allow the caller to leave a message. Move the REC TIME
switch to the ANN position.
The message counter LED displays "
standby.
Prerecorded outgoing message for Announce only feature is:
"Hello, no one is available to take your call."
Selecting a PIN code
To play your messages from a remote location, you will need to
enter a two-digit Personal Identification Number (PIN) code
(00-99). To select a PIN, perform the following steps.
" when system is on
1
On the base, press and hold
button until a tone sounds, and the
LED displays 00.
2
To set the first number, press
to scroll from 0 to 9.
or
When the desired number appears in
the display, press
the first number.
3
To set the second number, press
to scroll from 0 to
or
9. When the desired number
appears in the display, press
This selects the second number and
then the entered number is
announced.
. This selects
.
45
Advertisement
Table of Contents
