Using The Tone Feature; Flash And Call Waiting - Uniden EXS 9995 Owner's Manual

You may enter a pause
in the dialing sequence
during Standby Mode.
You may not enter a pause
in the dialing sequence
during Talk Mode.
The tone feature applies only
when the base is set to pulse.
The flash feature does not
function when and
line 1
are on a conference
line 2
call. (See the 3-WAY
CONFERENCING and 4-WAY
CONFERENCING, pages 21
and 22.)
Dialing from Standby Mode
1. Pick up the handset.
2. Use one of the memory features. (See Using Memory Dialing, page 32).
3. Press .
line 1
4. When you finish the call, press

USING THE TONE FEATURE

If you are dialing in the pulse mode and
need to enter tone digits, press
enter the digits. Once the call has ended, tone
mode is canceled and pulse dialing resumes.

FLASH AND CALL WAITING

If you have Call Waiting service and a call
waiting tone sounds, press
call. After a short pause you will hear the new
caller. To return to the original caller, press
again.
flash
, or return the handset to the base.
line 1
then
tone
to accept the
flash
17