Uniden EXS 9995 Owner's Manual page 37

4. If you want to set CIDCW, use the
keys to move the cursor to
you can press 2.
Press the key to toggle between
select
and .
5. After you finish the setting, press
and return the handset to the base.
Programming Your Area Code
1. Press and hold
call id/hold
seconds. The following screen appears.
2. Use the and keys or the number
key (1 or 2) to select
. Then press
The following screen appears.
3. Use the and keys to move the cursor
to select
Press . Use the number keypad to enter
select
or change the area code. Press
4. After you have made your selections, press
and return the handset to the base.
call id/hold
Screening Your Calls
Caller ID allows you to review caller
information before answering your
phone. At the beginning of the second
ring, the display shows the line number,
that is being used, name, and phone number of the caller. If your Caller ID
service is number only, the name does not appear on the second line.
If a name or number is not available, the display shows a message such as
Incomplete Data, Private Number, Private Name, etc.
and
or
call id/hold
for two
or
.
select
:
again.
select
35