Table of Contents
Advertisement
Chain Dialing
On certain occasions, after dialing a number, you may be requested by
the party or service you are calling to enter a special access code, such as
when performing a banking transaction. To do this, simply:
1. Store the access code into one of the memory numbers.
2. Dial the main number.
3. At the appropriate time, press
number where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location (0-9),
follow these steps:
1. Remove the Handset from the Base Unit.
2. Press
twice.
mem
3. Press the memory location
number (0-9).
A tone indicates that the
number is erased.
If more than 20 seconds elapse between each keystroke entry or
step, an error tone will sound and the erase procedure will be
canceled.
30
followed by the memory location
mem
EX 905/925
Advertisement
Table of Contents
