Automatic Digital Code Security - Uniden EX905 User Manual

Automatic Digital Code Security

To avoid unauthorized calls on your phone, a Digital Code was added to
all EX 905/925 phones. This Digital Code is shared only between the
Handset and Base Unit. The Code is set automatically when you first
use the phone.
To change the Digital Code, be sure the Handset is on the Base, then:
1. Remove the Handset from the Base Unit.
2. Press
page/find
3. While the Handset is still beeping,
place it back on the Base Unit.
4. When the beeping stops, briefly
remove the Handset again, and
then return it to the Base Unit.
The LED will blink to
status
indicate that the Digital Security
Code is set to one of the more
than 65,000 codes.
22
on the Base Unit.
EX 905/925