Low Battery Indicator - Uniden DXI665 User Manual

Continuous Battery Charging
For the best battery performance, return the Handset to the Base Unit at the end
of the day. This keeps the battery fully charged, so your phone works best and
avoids the battery "memory effect."
Battery Memory Effect
Rechargeable batteries can develop a "memory" (reduced charge capacity)
caused by repeated charge and discharge cycles.
Rechargeable batteries that have developed this effect will not operate to their
fullest capacity.
To Avoid Memory Effect: Operate the unit until the Rechargeable Battery is
completely discharged before recharging. Do not "top off" the charge after using
for a short time. Also, do not charge the Rechargeable Battery for extended
periods of time.
To Erase Memory Effect: Operate the unit until the Rechargeable Battery is
completely discharged, then recharge fully. Repeat this process at least three (3)
times.

Low Battery Indicator

When the Battery Pack in the Handset is
very low and needs to be charged, the
Battery icon flashes.
If the Battery icon begins to flash, the phone is programmed to eliminate its
functions to save power. The table below describes what to do to return your
phone to normal operation.
During a Call
Only the TALK button operates.
The Handset beeps and the Battery
icon flashes once every 3 seconds.
Complete your call as quickly as
possible.
Return the Handset to the Base Unit
for charging.
Allow 15 to 20 hours without any interruption for the Handset to fully
recharge.
TOTAL CALLS
In Standby Mode
None of the buttons will operate.
The Handset beeps and the Battery
icon flashes once every 3 seconds.
You will not be able to make a call.
Return the Handset to the Base Unit
for charging.
22
10