Table of Contents
Advertisement
Programming the DXI665 Base
For convenience,the Base Unit has ten memory locations, so you can store the
numbers you most often call without your Handset in the Base Unit. The
programming functions must be completed while the phone is in standby, since
the programming keys do not function while you are on the phone.
Storing a Number
Press mem .
1.
2.
Enter the number you
want to store (up to 16
digits).
3.
If a pause is needed
during dialing to access a
long distance service,
press pause .
Note: The pause button counts as one digit. Pressing pause more than once
increases the length of the pause between numbers.
4.
Press mem again.
5.
Enter the memory location (0-9).
A tone indicates that the number is stored.
5551212
9 pause 5551212
42
Advertisement
Table of Contents
