Table of Contents
Advertisement
Automatic Digital Code Security
To avoid unauthorized calls on your phone, a Digital Code feature was added to
the DXI665 phone. This Digital Code is shared only between the Handset and
Base Unit. The Code is set automatically when you first use the phone.
Please refer to the foldout in front of your operating guide for key positions.
To change the Digital Code, be sure the Handset is on the Base, then:
1.
Press the page/find button
on the Base Unit.
2.
After the Handset stops
beeping, remove it from
the Base Unit.
3.
Wait five (5) seconds, then return it to the Base Unit.
4.
The Battery icon will blink to indicate that
the Code has changed.
If the Base Unit loses power while the Handset is off the Base, the Digital
Code may be erased. When this happens, the Handset will not function.
25
Advertisement
Table of Contents
