Getting Started; Set Up The Base - Uniden D2998 User Manual

GETTING STARTED

Set Up the Base

Attach the Stand
For desktop use
D E S K
W AL L
1. Turnthestandsotheword Desk is
right-sideup(itwillbeontheleft).
2. Insertthetabsintothenotchesat
thetopofthebase.
3. Pressinonthelatchesandslip
themintothenotchesmarked Desk .
Remove the Stand
Pressinonthelatchesandslidethemoutofthenotches.
Connect the Corded Handset
Usethecoiledcordtoconnectthecordedhandsettotheconnectorontheleft
sideofthebase.
For wall mount use only
1. Onthefrontofthebase,slidetheclip
outofitsslot.
2. Rotatetheclip180degrees.
3. Flipitfromfronttobackandslideit
backintotheslot.
AL W
L
D E S K
For wall mount use
DE SK
W A L L
1. Turnthestandsotheword Wall is
right-sideup(itwillbeontheleft).
2. Insertthetabsintothenotchesat
thebottomofthebase.
3. Pressinonthelatchesandslip
themintothenotchesmarked Wall .
1
2
DE
SK
W A L L
3
English - 3