Uniden D2998 User Manual page 4

Connect the Power and Telephone Cords
1. ConnectthebaseACadaptertothepowerjackandthetelephonecordto
the jack.Routethecordsasshownbelow:
TEL LINE
For desktop use
2. PlugtheACadapterintoastandard120VACpoweroutlet,andconnect
thetelephonecordtoastandardtelephonewalljack.
3. Ifyouaremountingthephoneonthewall,placethemountingslotsoverthe
pinsonthewallplate,andslidethebasedowntolockitintoplace.
Test the Connection
Pickupthecordedhandsetfromthebase.Youshouldhearadialtoneandthe
displayonthebaseshouldsayTalk.Whenyougetadialtone,makeaquick
testcall.
If...
the display says Check Tel Line
don't hear a dial tone
you keep hearing a dial tone
Changing from Tone to Pulse Dialing
Yourphoneusestonedialingbydefault.Ifyourphonecompanyusespulse
dialing,youneedtochangeyourphone'sdialmode.
1. Press select/menu
2. SelectDial mode,thenPulse.You'llhearaconfirmationtone.
TosendDTMFtonesduringacall(e.g.,foranautomatedresponsesystem),
press totemporarilyswitchtotonedialing.Whenyouhangup,thephone
automaticallyreturnstopulsedialing.
4 - English
or you
andselectGlobal
For wall mount use
Try...
checking the connection between the base
and the phone jack.
changing to pulse dialing.
Setup(seep.10forusingthemenus).