Uniden D2998 User Manual page 23

Caller ID problems
Caller ID displays briefly
and then clears.
Caller ID displays, but
I can't hear the CID
announcements.
Multi-station problems
I can't transfer calls.
Two handsets can't talk to a caller. x See if any station is in Privacy Mode.
A handset says Unavailable.
I can't register a new handset.
Answering system problems Possible solutions
The answering system does
not work.
The system won't record
messages.
A handset can't access the
answering system.
My outgoing message is
gone.
I can't hear the base
speaker.
Messages are incomplete.
The system keeps recording
when I answer on an
extension.
Installing a Line Filter or DSL Filter
AtelephonelinefilterorDSLfilterpreventsservicesthatusethephoneline
fromcausinginterferenceonyourphone.Togetalinefilter,contactyour
serviceproviderorlookinanelectronicsstore.
Plugthefilterintothetelephonewalljackandplugthebaseintothefilter.
Makeatestcalltomakesurethenoiseisgone.
Possible solutions
x You may have to change the line mode. Contact
Customer Service for instructions.
x Making sure TTS (Text-To-Speech) is turned on.
x Increasing the ringer volume so the CID
announcements are louder.
Possible solutions
x Reset all the stations (see p. 24).
x Move the handset closer to the base.
x See if any station is in Privacy Mode.
x Reset the handset (see p. 24).
x Reset the handset (see p. 24).
x See if you have 6 registered handsets.
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if Record Time
x Delete messages (memory may be full).
x See if another handset is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record your
personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the Record
x Delete messages (memory may be full).
x You may have to change the line mode. Contact
Customer Service for instructions.
is set to Announce
Time.
Only.
English - 23