Getting Your Messages - Uniden D2998 User Manual

Getting Your Messages

To...
play
new messages
restart this
message
replay an earlier
messages
skip a message
slow down
message playback
delete
a message
delete
all messages
play
old messages
stop playback
Screening Your Calls
Youcanusetheansweringsystemforcall screening.Whilethesystemtakesa
message,youcanlistenonthebasespeaker(ifyouturnonCall
ahandset.Onlyonehandsetcanscreencallsatatime.Ifanotherhandsettries
toscreenthecall,itbeepsandreturnstostandby.
To...
hear the caller leaving
a message
answer the call
mute the call screen
without answering
  Ifyoumutethecallscreen,thesystemcontinuestakingthemessage:itjust
stopsplayingthroughthespeaker.
20 - English
From the base
Press play/stOp .
The system announces the number of new and old messages,
then plays each new message (followed by the day and time
if set) in the order it was received.
Wait at least 5 seconds after the message starts playing,
press Repeat .
Within 2 seconds after a message starts playing,
press Repeat .
Press skip .
Press slOW . Press again to return to
normal playback speed.
While the message is playing,
press Delete .
With the phone in standby, press
Delete ; press Delete again to confirm.
After the system plays the new messages,
press play/stOp again.
Press play/stOp .
From the base
Just listen to the caller over
the speaker.
Pick up the corded handset.
Press cleaR/mute .
From a handset
Press mute/messages .
select 1:Repeat.
select 1:Repeat.
Select 3:Skip.
Not available.
select 4:Delete
Not available.
select 2:Play.
Select 5:Stop.
Screen)orfrom
From a cordless handset
Press mute/messages .
Press talk/enD .
Press flash/exit or return
the handset to the cradle.