Getting Your Messages; Resetting The Voice Message Indicator - Uniden DECT 1515 Owner's Manual

When you sign up for a voice mail service, your service provider
Setting Up Your Voice Mail
should give you an access number. If you don't have this information,
contact your provider before you start.
1. With the phone in standby, open the menu.
2. Select Global Setup, then select Edit Voice Mail. For the New
Zealand model the Spark access number (083210) is
preprogrammed.
3. Enter your access number exactly as you would dial it. You can
enter a total of 20 digits. If you need the phone to wait for a few
seconds between digits (to wait for the service to answer, for
example), press
seconds isn't long enough, you can insert as many pauses as you
need, but each pause counts as one digit. Press
you're finished.
1. Press

Getting Your Messages

number you programmed into this handset.
mEssAgEs (
If the voice message icon remains after you check your messages, you

Resetting the voice message indicator

can reset it.
1. With the phone in standby, open the menu.
2. Select Global Setup, then select VMWI Reset.
3. Select Yes.
20
to insert a 2-second pause. If two
rEDiAl/pAusE
and then
)/muTE
sElECT/mENu
to dial the access
mENu/sElECT
when