Using Orb Disks - Castlewood USB ORB 2.2 GB Owner's Manual

2.2

USING ORB DISKS

Disk Insertion Instructions
Push a disk straight into the ORB drive
with your finger, all the way in, until it
stops, and then press down to ensure
that the disk is seated.
Disk Ejection Instructions
You can eject a disk using the operating system, recommended, or by
pressing the Insert/Eject button on the front of the drive (for PC only).
CAUTION: Do not try to remove disk by lifting up on the
front edge of the disk while it is in drive.
CAUTION: Do not move or transport the drive with the disk
installed. This can damage the heads and media. A disk
must not be in the drive when the drive is moved or
shipped.
From Windows Desktop
1. Close all open applications and files on the ORB disk before ejecting the
disk otherwise data could be corrupted.
2. From the Desktop, double click on My Computer.
3. Right click on ORB drive icon.
4. Select Eject.
5. Green LED will flash amber (Disk spin down and air purge cycle).
6. ORB drive door will automatically open.
7. Disk will be ejected.
8. Remove ORB disk.
9. Door will automatically close.
10. Place ORB disk in protective ORB disk case.
From Mac Desktop
1. Close all open applications and files on the ORB disk before ejecting the
disk otherwise data could be corrupted.
2. From the Desktop, highlight the ORB SCSI drive icon and hold the mouse.
3. Drag the icon and drop it in the Trash Can icon.
4. Green LED will flash amber (Disk spin down and air purge cycle).
5. ORB drive door will automatically open.
6. Disk will be ejected.
7. ORB drive icon should disappear from Desktop.
8. Remove ORB disk.
9. Door will automatically close.
10. Place ORB disk in protective ORB disk case.
Figure 8
Disk insertion
10