Using Orb Disks - Castlewood EIDE ORB 2.2 GB Owner's Manual

2.2 USING ORB DISKS

Disk Insertion Instructions
Push the ORB disk straight into the
ORB drive with your finger, all the way
in, until it stops, and then press down
to ensure that the disk is seated.
Disk Ejection Instructions
Make sure that you eject the disk before powering off your computer
system.
CAUTION: Do not try to remove disk by lifting up on the front
edge of the disk while it is in drive.
CAUTION: Do not move or transport the drive with the disk
installed. This can damage the heads and media. A disk must
not be in the drive when the drive is moved or shipped.
From Windows Desktop (Win 98/98SE / Win NT 4.0 (SP4+) / Win 2000
(SP2+) / Win ME / Win XP)
1. From the Desktop, double click on My Computer.
2. Right click on ORB drive icon.
3. Select Eject.
4. Green LED will flash amber (Disk Spin down and air purge cycle).
5. ORB drive door will automatically open.
6. Disk will be ejected.
7. Remove ORB disk.
8. Door will automatically close.
9. Place ORB disk in protective ORB disk case.
From Mac Desktop (Mac OS 8.6 - 9.2.2)
1. Close all open applications and files on the ORB disk before ejecting
the disk otherwise data could possibly be corrupted.
2. From the Desktop, highlight the ORB EIDE drive icon and hold the
mouse.
3. Drag the icon and drop it in the Trash Can icon or utilize the eject
command support by pressing the command key (Apple) and “E” or
pressing the command key (Apple) and “Y”.
Figure 16
Disk insertion
18