Accessing Your Orb Drive; Reassigning Drive Letters - Castlewood USB ORB 2.2 GB Owner's Manual

Emergency Ejection Method
1. Shut down your computer system (turn power off).
2. Remove power from your ORB drive by either unplugging the power
supply or removing the power connector from the drive.
3. Wait 30 seconds.
4. Insert a paper clip into emergency eject hole.
CAUTION: Do not insert a paper clip into the emergency
eject hole while there is power to your drive. This may
result in damage to your drive & disk, and may void your
warranty.
2.3

ACCESSING YOUR ORB DRIVE

My Computer: Win 98/98SE / Win 2000 (SP2+) / Win ME / Win XP.
1. From the Desktop place the cursor over My Computer and double click.
2. Identify the ORB Removable Drive and double click.
Explorer: Win 98/98SE / Win 2000 (SP2+) / Win ME / Win XP
1. From the Desktop click on the Start Button.
2. Select Programs.
3. Select Explorer.
4. Select My Computer.
5. Select the ORB drive icon from the drive hierarchy and double click.
Mac OS 8.6 or later
Identify the ORB drive icon on Desktop and double click.
2.4

REASSIGNING DRIVE LETTERS

Under Win 98/98SE / Win 2000 (SP2+) / Win ME / Win XP you may be able to
change the drive letter assigned to your ORB drive.
You may want to change the drive letter for convenience, or because there was
a change to existing drive letters when you installed your ORB drive. Changes
to existing drive letters may cause problems with applications installed on the
drives with changed letters.
Installation Help Note for USB drives, covers in detail how drive letters are
assigned and the ways available to reassign drive letters. Help Notes are
available on our web site at www.castlewood.com.
Figure 10
Emergency eject
12