Table of Contents
Advertisement
SECTION 1 INSTALLATION GUIDE
WELCOME TO ORB!
The ORB USB drive offers you everything that you want in a portable, removable
disk drive – high capacity, easy installation and hot pluggable, at an affordable
price that can be easily connected to your system using a USB interface.
ORB USB drive is a SCSI drive that connects to a USB port on your computer
system through a SCSI to USB adapter cable.
1.1
INTRODUCTION
This installation guide provides detailed instructions, and illustrations, as well
as safety precautions that will help you configure and install your ORB USB
drive. It is recommended that you use this guide along with your computer
manual.
If you intend to connect the ORB SCSI drive to your computer system’s SCSI
interface, refer to SCSI ORB Owner’s Manual. You can download this manual
in PDF format from the Support Center on our web site at www.castlewood.com.
1.2
SYSTEM REQUIREMENTS
Hardware:
PC – Pentium class systems with either built-in or add-on USB interface
Mac – iMac, iBook, bondi-blue Power Mac G3, G4
Operating Systems:
PC – Win 98/98SE, Win 2000 (SP2+), Win ME, Win XP
Mac – Mac OS 8.6 - 9.2.x, OS X
1.3
HARDWARE/TOOLS FOR INSTALLATION
A #0 Phillips screwdriver is needed to change your ORB drive’s SCSI ID.
You may require tools if you need to install an add-on USB adapter card. In this
case, follow the instructions provided by the vendor of the add-on card to perform
this installation.
3
Advertisement
Table of Contents
