Assembly — Installing the Light Kit (continued)
Finishing the light kit assembly
13
and mounting the glass shade
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Install the three 40W candelabra bulbs (OO) (included).
□
Place the glass shade (K) over the light kit (J) stem,
and secure with the metal nut (KK) (rubber side on
the top). Do not overtighten.
□
Insert the two pull chains through the eyelets in the
glass shade (K) and glass cap (LL). Secure the glass
cap (LL) and decorative nut (MM) provided. Do not
overtighten.
NN
J
KK
LL
MM
14
OO
NN
K