Hob - Hints And Tips - Electrolux LKI66440SW User Manual

Operating the fan speed manually
You can also operate the function manually.
To do that touch when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually. When you press
raise the fan speed by one. When you reach
an intensive level and press
set fan speed to 0 which deactivates the hood
fan. To start the fan again with fan speed 1
touch .
To activate automatic operation of the
function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
6.15 Power management function
• Cooking zones are grouped according to
the location and number of phases in the
hob. See the illustration.

7. HOB - HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a strong
electro-magnetic field creates the heat in
the cookware very quickly.
Use the induction cooking zones with
suitable cookware.
Cookware material
16 ENGLISH
• Each phase has a maximum electricity
• The function divides the power between
• The function activates when the total
you
again you will • The function reduces the power of the
• The heat setting display of the reduced
• correct: cast iron, steel, enamelled steel,
• not correct: aluminium, copper, brass,
Cookware is suitable for an induction hob
if:
• water boils very quickly on a zone set to
• a magnet pulls on to the bottom of the
load.
cooking zones connected to the same
phase.
electricity load of the cooking zones
connected to a single phase is exceeded.
other cooking zones connected to the
same phase.
zones changes between two levels.
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
glass, ceramic, porcelain.
the highest heat setting.
cookware.