Functions In System Set Mode; Change To Training Mode/Change To User Mode Setting - TVS PT262 User Manual

12 FUNCTIONS IN SYSTEM SET MODE

Attention:
1. If transaction is done, Z daily report must be printed before entering SYSTEM SET mode. Clerks logout
after printing Z daily report.
2. The machine beeps for three times when an error occurs and ERR X is displayed. Press key [C] to stop the
beeps. Please refer to chapter 15 for the error details.
The following items can be set in S mode:

CHANGE TO TRAINING MODE (show in user mode)/CHANGE TO USER MODE (show in training
mode)

CHANGE TO TAX MODE (show in user mode, it will disappear in tax mode)

MACHINE NO. PROGRAM

SET CLERK

SET PROMOTER

OPTION OF DATA UPLOAD

CLEAR SALES DATA

SET LOCAL CURRENCY SYMBOL

SET RECEIPT TYPE

DATE AND TIME SET

SET ALARM POINT FOR TIME DIFFERENCE

EXTERNAL DEVICE SET

FISCAL SET
Shift to SYSTEM SET mode (S mode) by pressing key [CLERK], and than press [CASH] key. Input the manager's
number and password, and then press key [CASH] to enter. If you set the purview ‗SYSTEM SET' for the clerk, there
is no need to input the manager's number and password to enter SYSTEM SET mode.
Press key [↑] or [↓] to select the item you want to set in SYSTEM SET mode.
In SYSTEM SET mode, some function keys are defined as below:
[↑]
[↓]
[CASH]
[C]

12.1 Change to Training Mode/Change to User Mode Setting

If you are in USER mode, this item will be shown as ‗CHANGE TO TRAINING MODE'; if you are in TRAINING
mode, this item will be shown as ‗CHANGE TO USER MODE'.
Use key [↑] or [↓] to select ‗CHANGE TO TRAINING MODE' or ‗CHANGE TO USER MODE' item, and then
press key [CASH] to confirm.
After system prompts: <INPUT ECR NO (8DIGIT)>, input the 8-digit machine number which is marked on the
receipt, and then press [CASH] to confirm.
Waiting for several seconds, system returns to REG mode, and the clerk logouts.
Shift to the previous item
Shift to the next item
Confirm
Clear the current input / Return to the previous state
39
PT - 262