Table of Contents
Advertisement
7 LOGIN AND LOGOUT SYSTEM
7.1
Manager Login
Manager Password:
This password is used for manager entering SET mode, X REPORT, Z REPORT and SYSTEM SET mode. You can
set 4 managers, and the password is not more than 8 digits.
1) The No.1 manager can set other managers' passwords and rights.
2) No. 2~4 managers only can set their own password.
3) There is a default manager, No.1 with password 0. When you use the ECR for the first time, you need to enter SET
mode as No.1 manager, change the password and set other managers' right.
4) Login: manager code + [CASH] + manager password + [CASH].
For instance: No.1 manager with password 0 login SET mode, press [CLERK], and use key [↑] or [↓] to choose SET,
press [CASH], then
1 + [CASH] + 0 + [CASH]
7.2
Clerk Login and Logout
Attention:
The cash register will beep for three times when an error occurs. Press key [C] to stop the beep.
If no clerk login, any sales operation will cause an error.
The cash register does not work without a clerk login. Each receipt has a clerk mark to identify the clerk is on duty.
To guarantee the reality of sales report, each clerk has an exclusive login password.
Method of login system:
No key entry (or press [C] key several times until it returns to initial status). This cash register supports four clerks (A
to D), the corresponding code is 1 to 4.
LCD display:
Login as below:
If clerk login password has been set, then
Input: N [CLERK] SSSS [CASH], ‗N' is clerk code and the ‗SSSS' is clerk password. (The clerk's password ranges from
0 to 9999)
Example 1: clerk A login (login password is 888)
Input: 1 [CLERK] 888 [CASH]
D C
B A
CLERK 4
CLERK 3
CLERK 2
CLERK 1
11
PT - 262
0
Advertisement
Table of Contents
