Operations Mode Selection - TVS PT262 User Manual

6 OPERATIONS MODE SELECTION

The ECR has 6 operation modes. Press key [CLERK] to shift operation mode. These 6 modes can be shifted in turn.
See the corresponding chapter for functions of each mode.
REG X
REG
X REPORT
Z REPORT
SET
SYSTEM SET
OFF ECR
AC
Before performing any sales operations, a clerk must login. Read the chapter 7 ‗LOGIN AND LOGOUT SYSTEM'
for a description of clerk operations.
All report can be printed in X or Z mode. The difference between them is:
In X mode, total sales sum is not set to zero after printing report, next sales sum will be accumulated.
In Z mode, total sales sum is set to zero after printing report, next sales sum will be recalculated.
Attention: If transaction has been done in REG mode, you must print Z daily report (refer to chapter 11.3 for Z
daily report printing) before entering SET mode and SYSTEM SET mode.
Flicker when pressing
[SHIFT] key.
Z SET S
▲ ▲ ▲ ▲ ▲
Sales operation mode
To read various reports
To read reports and reset the total to zero
To set some items
To set system parameter
Soft off power
The cursor flashes when AC is lost
Flash when
RETURN mode.
OFF AC
▲ ▲ ▲ ▲
D C
10
PT - 262
in Flash when the receipt
paper runs out.
▲
0
B A