US Robotics Courier V.Everything 3CP3453 Getting Started Manual page 18

7
Write down the COM port and IRQ that ComTest
recommends, and then select Next >.
COM
IRQ
8
If ComTest gives you the choice, select Write to
SYSTEM.INI and then select Next >, and then Finish.
9
Eject the QuickLink II diskette, exit Windows, and then
power OFF your computer.
10
If ComTest recommends settings that are different from the
Courier's defaults of COM2 and IRQ3, set the Courier to use
the COM port and IRQ settings that ComTest recommends:
a
Look at the Courier's jumper settings:
2-6 Courier V.Everything Internal Modems: Getting Started
_______
_______
Figure 2-4. Location of the Jumpers.