US Robotics Courier V.Everything 3CP3453 Getting Started Manual page 35

Select the port to which the Courier is connected.
When you click OK, Remote Access setup asks you if you would
like it to try to detect the modem connected to the port. Click
Cancel to select the Courier from a list.
Select US Robotics Courier V.34, and then click OK and exit
from Network setup. When you're prompted to restart NT, click
Don't Restart Now. Then, from Program Manager, click File |
Shutdown. When NT shuts down, power your computer off
and then on again.
Now RAS knows about the serial port and the Courier that is
attached. Next, you need to set up user accounts and access
privileges; those tasks are beyond the scope of this manual.
Communicating with the Courier 3-11