US Robotics Courier V.Everything 3CP3453 Getting Started Manual page 40

4
The following window will appear. Change the Setup
Modem String to match the string in the figure below.
5
Select OK, then OK, then OK.
NetManage Chameleon 4.5
You should know in advance which Internet service provider
(for example, PSINet or NETCOM) you will be using.
NetManage provides a number of configuration templates for
many popular Internet service providers. The settings
recommended here are the Courier-specific ones only.
1
Click Setup | Communications | Port. Two settings will be
specific to your setup:
Baud Rate: 57600 bps is recommended, but only if you have
a 16550 UART. The UART is a computer chip that controls
the transmission and reception of signals through your
computer's serial port. Check your computer's manual to be
sure - slower UARTs, like 16450 or 8250, will limit speeds to
19200 bps.
Connector: Select the COM port to which the Courier is
attached.
4-2 Courier V.Everything Internal Modem: Getting Started