Standard Setup - US Robotics Courier V.Everything 3CP3453 Getting Started Manual

Standard Setup

If your computer can run Windows applications, follow the
steps below to determine how to set up the Courier.
If your computer can't run Windows applications, see Chapter 3,
Communicating with the Courier.
1
Before attempting to insert the Courier card in your
computer, power ON your computer and start Windows.
2
Insert the QuickLink II diskette into drive A (or B).
3
From the Program Manager group's menu bar, select File
and then Run...
4
Type a:\comtest (or b:\comtest, depending on the drive into
which you inserted the diskette).
5
Select Recommend settings for a new modem and then
select Next >.
6
Select Internal modem and then select Next >.
Installing the Courier 2-5