fantastic furniture Sedona Manual page 7

Step 2
Insert 4 x Cam Nuts (H5) into Side Panels (P6 & P7).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Attach Side Panels (P6 & P7) to the Top Panel (P3), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver.
Attach Bracket (H10) to the Top Panel (P3) with Bracket Screw (H11),
tightening with a Phillips Head Screwdriver.
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Page 7