fantastic furniture Sedona Manual page 14

Step 9
Note: the holes must be
towards back as shown.
Insert 4 x Cam Nuts (H5) into 2 x Centre Panels (P9).
Rotate the Cam Nuts (H5) so the arrows point towards the incoming bolts.
Attach 2 x Centre Panels (P9) to the Centre Shelf (P4), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Page 14