Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Indentify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
What you need to assemble the product Parts list A: Seat Base B: Seat Back Hardware list C: Plastic Washer × 5 D: Plastic Leg × 5 PAGE 4 www.fantasticfurniture.com.au...
Page 5
Step 1 Use 1 × leg (D) with 1 × washar (C) and place in holes as shown. Turn clockwise by hand until fully tightened. Repeat this step for all legs. PAGE 5 www.fantasticfurniture.com.au...
Page 6
Step 2 Attach the seat back to the seat base, ensure the clips are secured. PAGE 6 www.fantasticfurniture.com.au...