Transmitting Data; Connecting A Device To The User Data; Data Transmission Format - Sony RSE-500 Operating Instructions Manual

@ SUB ADDR (address) key
This key is for future use.
(D CAMERA key
Press this key to select the camera. For setting the
camera number, use the number keys 6).
(B MENU key
Press this key to bring up the main menu on the
monitor screen.
QD AUX (1/2) keys
Press these keys to recall preset camera angles and
zoom settings.
1: press to recall settings registered in 1.
2: press to recall settings registered in 2.
@® DISPLAY key
Press this key to set the on-screen display. Each time
you press this key, the screen switches between ON
and OFF.
(P IRIS (OPEN/CLOSE) keys
These keys control the iris of the camera.
OPEN: press to open the iris.
CLOSE: press to close the iris.
@ P in P (picture in picture) key
This key displays an inset window on the monitor
screen. Each time you press the key, the inset window
moves as follows.
p%
sas
A
The monitor screen
® PICTURE key
Transmitting Data
You can transmit data from a device connected to the
USER DATA port between Video Transmitters via
ISDN.
Connecting a Device to the
USER DATA Port
ues
Connect the RS-232C port of the device and the USER
DATA port of the Video Transmitter with the RS-
232C cable.
Use an appropriate RS-232C cable that complies with
the USER DATA port standards.
For details on pin assignment of the USER DATA port, see
"Pin Assignment" on page A-10 (EN).
Data Transmission Format
The data transmission format is as follows:
Baud rate: 1200/4800/9600/19200 bps
Data word length: 7/8 bits
Parity bits: none/odd/even
Stop bits: 1/1.5/2 bits
For details, see "Setting Up the USER DATA Port" on page
2-13 (EN).
T